Features
 
PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems

Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs

Door sequencer: six freely programmable outputs with set-up assistant

SRS: Serial Receiver System provides the facility to use receivers with serial interface: Spektrum DSM2 and DSMX, Multiplex M-Link, Futaba S-Bus, HoTT, JR X-BUS and Jeti R-SAT2

Unrestricted channel assignment for all 24 PowerBox outputs

Graphic LCD screen with 128 x 64 pixels

Extremely user-friendly menu-based programming using the SensorSwitch

Up to 18 channels - depending on the radio control system in use

Signal amplification and interference suppression for all 24 outputs

Flight recorder, recording of lost frames, fail-safe events and all battery data

Variable frame rate, range 9ms – 21ms

Two 16-bit processors for fast, high-resolution signal processing

2 x double-regulated output voltages for receivers and servos

2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V

Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink

bus systems

Direct transmission of battery voltage, capacity, RX-data and GPS data to the transmitter

Separate voltage and capacity display for each battery

Minimum value memory alerts the user to voltage collapses

Large-area heat-sinks for high regulator performance

Regulator monitoring, regulator error indicator

Support for three battery types: LiPo, NiMH / NiCd, LiFePo

Suppression of any servo feedback currents which may occur

Updateable with PowerBox Systems USB Interface connectors

  
Technical Data
 
Operating voltage : 4.0V - 9.0V

Power supply : 2S LiPo, 2S LiFePo, 5S NiCd/NiMH

Current drain Power-on state : 185mA (with LCD)

Current drain Standby :  30µA

Maximum load current Peak  : 4x20A

Drop-out voltage :  0.3V

Output voltage :  5.9V and/or 7.4V regulated

Signal input :  serial

Supported RC systems :  Spektrum, Futaba, HoTT, M-Link, Jeti, JR

Receiver redundancy SRS

Channels :  18

Servo sockets :  24

Programmable servo outputs : 24

Servo signal resolution : 0.5µs

Signal frame rate : 9ms, 12ms, 15ms, 18ms, 21ms

Screen : LCD, backlite

Integral door sequencer : yes

Supported telemetry systems : Futaba, Jeti, Spektrum, HoTT, M-Link

Dimensions : 136 x 82 x 20 mm

Weight : 158g

Weight Sensor Switch : 15g

Weight of LCD screen : 65g

Temperature range : -30°C to +75°C 

Power box Champion SRS 매뉴얼 (클릭하면 보실수 있습니다)

*이 상품은 도매 불가 상품입니다*