Features
Integral iGyro : triple-axis gyro system with heading function and set-up assistant
Six independent gyro outputs for : 2 x ailerons, 2 x elevators, 2 x rudders
GPS-regulated gyro gain
Special regulatory algorithm for fixed-wing model aircraft
Extremely accurate triple-axis MEMS sensor
Integral Delta and V-tail mixer
Door sequencer : six freely programmable outputs with set-up assistant
PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems
Servo-Match function : servo centre, end-points and reverse for all 24 servo outputs
SRS: Serial Receiver System provides the facility to use receivers with serial interface : Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti, Multiplex M-Link, , HoTT and JR X-BUS
Unrestricted channel assignment for all 24 PowerBox outputs
Graphic LCD screen with 128 x 64 pixels
Extremely user-friendly menu-based programming using the SensorSwitch
Up to 18 channels - depending on the radio control system in use
Signal amplification and interference suppression for all 24 outputs
Flight recorder, recording of lost frames, fail-safe events and all battery data
Variable frame rate, range 9ms – 21ms
Two 16-bit processors for fast, high-resolution signal processing
2 x double-regulated output voltages for receivers and servos
2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink bus systems
Direct transmission of all battery informations, receiver data and GPS data to the transmitter
Separate voltage and capacity display for each battery
Minimum value memory alerts the user to voltage collapses
Large-area heat-sinks for high regulator performance
Regulator monitoring, regulator error indicator
Support for three battery types : LiPo, NiMH / NiCd, LiFePo
Suppression of any servo feedback currents which may occur
Updateable with PowerBox Systems USB Interface connectors
Technical Data
Operating voltage : 4.0V - 9.0V
Power supply : 2S LiPo, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state : 185mA (with LCD)
Current drain Standby : 30µA
Maximum load current Peak : 4x20A
Drop-out voltage : 0.3V
Output voltage : 5.9V and/or 7.4V regulated
Signal input : serial
Supported RC systems : Spektrum, Futaba, HoTT, M-Link, Jeti, JR
Receiver redundancy : SRS
Channels : 18
Servo sockets : 24
Programmable servo outputs : 24
Servo signal resolution : 0.5µs
Signal frame rate : 9ms, 12ms, 15ms, 18ms, 21ms
Integral gyro system : iGyro
Gyro regulation : Heading- and Normalmode
Gyro sensor type : MEMS
Number of sensor axes : 3
Screen : LCD, backlite
Integral door sequencer : yes
Supported telemetry systems : Futaba, Jeti, Spektrum, HoTT, M-Link
Dimensions 136 x 82 x 20 mm
Weight : 160g
Weight Sensor Switch : 15g
Weight of LCD screen : 65g
Temperature range : -30°C bis +75°C
Power Box Royal SRS 퀵스타트 매뉴얼 (클릭하면 보실수 있습니다)
Power Box Royal SRS 매뉴얼 (클릭하면 보실수 있습니다)
*이 상품은 도매 불가 상품입니다*
